What To Do When You Have Chain Saw Cutting Problems
Chain saws are wonderful tools when they are cutting properly. Most people know that when a chain saw gets dull it does not cut very easily, and in fact can become quite dangerous. But, there are a number of other problems that can cause your chain saw to cut poorly. Most of these issues can be traced back to improper sharpening procedures or poor maintenance.
When you’re cutting with your chain saw, if it cuts crooked or at an angle this is generally an indication that the teeth have been improperly filed. Either they were filed at the wrong angle, or every tooth was not filed the same amount and with the same pressure. If filing is not the cause of a chainsaw pulling to one side or the other, then it could be the bar or the sprocket at the far end of the bar are in poor condition and need maintenance or straightening.
If you have a newly sharpened chain saw and it dulls quickly, usually this is caused by thin cutting edges resulting from too much file pressure or low angle when sharpening your chain saw. Your chainsaw will need to be refiled using less pressure, as well as lowering the angle of attack and checking the height of the depth gauges.